The ancients (Apollonius, apollonius:conics) showed that one may
make three distinct sections through a cone whose curves differ from the circular base:
The first oblique section, cutting completely across the cone without touching its base, the
learned call Elipsis; in German I shall name it an Eierlini (egg-line).
The second section, drawn parallel (ein barlini) to one side of the cone, the learned call
Parabola; let it be named a Brennspiegellini (burning-mirror
line), because a hollow mirror shaped from it kindles fire at its focus.
The third section, drawn parallel to the vertical axis of the cone, they call Hiperbole; I
shall name it a Gabellini (fork-line).
To plot the Elipsis truthfully, one must first draw the upright elevation cone
(aufgezogner Grund) with apex a and base b–c, mark the
oblique cutting segment f–g divided by eleven points into twelve equal intervals
(1..11), and directly beneath it construct the circular ground plan
(nidergedruckter Grund, centered at Oplan):
At each numbered height 1..11 along f–g, measure with the compass the horizontal
semi-radius of the cone from its axis out to its generator, carry (abstelen) that radius down
into the ground plan around Oplan, and intersect that concentric circle with the vertical
projector dropped from station k on f–g.
Erect a separate vertical axis equal in true length to f–g with eleven perpendicular
cross-lines, transfer the chord half-widths cut off in the ground plan symmetrically to both
sides of each station, and trace the curve point by point.
Dürer's two-view orthographic descriptive geometry of the conic section (Book I, Fig. 34): elevation cone (:g:`a`, :g:`b`, :g:`c`) sliced along :g:`f`–:g:`g`, circular ground plan (:g:`O_plan`) below, and true-shape section proving exact bilateral symmetry $w_k = w_{12-k} = \frac{\sqrt{2k(12-k)}}{3}$.
Immediately after the three conic sections and the law of equal angles of incidence and
reflection for the paraboloidal burning mirror (Fig. 36), Dürer introduces three remarkable
kinematic curves and instruments:
The Muschellini (mussel-shell line, Figs. 38–39, pp. 039–041), traced both pointwise on
sixteen sliding stations and mechanically by a wheeled lance (lentzlein) riding in a grooved
beam, adapting Nicomedes's conchoid principle.
The Spinnenlini (spider-line, Fig. 40, p. 042), generated by a compound planetary motion
in which arm bc rotates degree-for-degree around b while crank ab rotates around
a—an exact epitrochoid / limaçon a century before Étienne Pascal.
A four-jointed spatial linkage (Figs. 41–42, pp. 043–045) whose discs and telescoping rods
diminish in exact $\sqrt{2}$ geometric proportion to trace three-dimensional serpentine curves.