Roman Antiqua Capitals (A–Z) & Modular Gothic Textura¶
Because builders and painters inscribe letters on high walls and monuments, Dürer devotes pages 115–141 to the first printed northern Renaissance geometric construction of both Roman capitals (*ein Lateinisch abc*) and Gothic blackletter (*Textur*).
Every Roman capital is inscribed in a rechte Fierung a.b.c.d. of side $10$
units (with a secondary $9$-unit canon on p. 130), governed by broad-edged pen contrast: thick
strokes equal $\frac{1}{10}$ of the square ($w = 1$), and thin strokes equal one-third of the thick
stroke ($t = \frac{1}{3}$):
Capital A (p. 115): Bisect square a–b–d–c by vertical midline e–f and horizontal midline g–h, and step foot points i and k inward by one-tenth ($1$ unit) from bottom corners c and d. Draw the thin left leg ($t = \frac{1}{3}$) up from i and the thick right leg ($w = 1$) down to k so top midpoint e falls midway inside the apex; place the crossbar ($t = \frac{1}{3}$) immediately below midline g–h, enclosing triangular counter apex V. Flare the outer feet to corners c and d with tangent serif arcs centered at SL and SR of radius $\frac{10}{7}$, fillet the inner feet with arcs of diameter $1$ (radius $\frac{1}{2}$), and trim the overhanging apex with a concave Schlangenlini.
Shifted-Diagonal Capitals O & Q (pp. 124–125): Unlike Luca Pacioli's four-circle construction (pacioli:1509), Dürer constructs both the outer contour and inner counter of O with just two congruent circles! Draw the $45^\circ$ diagonal c–b (Ortstrich) through square center i, mark centers f and g symmetrically astride i along c–b separated by the thick stroke width $|fg| = 1$, and draw from each center a circle tangent to two adjacent sides of the square ($r = 5 - frac{sqrt{2}}{4}$); only the short thin hairlines near lens intersections P1 and P2 are rounded smoothly by hand. Appending a sweeping tail through corner d to tip h transforms O immediately into Q.
Modular Combinatorial Gothic Textura (pp. 136–141): For traditional alte Textur, Dürer deliberately begins not with
abut with minuscule i (“darumb das schier alle pustaben darauß gemacht mögen werden”): stack three unit squares vertically, trisect top and bottom edges, and cap the stem with two $45^\circ$-rotated unit diamond squares (Ort-Fierungen) set at the front upper and rear lower trisection points. Joining two suchi-stems corner-to-corner yields n, and three yields m—automatically producing an exact irrational stem pitch of $\sqrt{2}$ and an interior counter width of $\sqrt{2} - 1 \approx 0.414 < 1$, explaining algebraically why Dürer observes that “the white space between the strokes becomes narrower than the breadth of a stroke”!